Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 29.06.2025 03:38

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

2024–10–16 [ OO OLAOYE OYEBODE ]

A fuse is a non-resetable over current circuit protector.

How do I make an instrumental version of a Hindi song?

The MOV will conduct when the voltage exceeds 50% of line voltage.

Upvotes:

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

That whole wheat bread you've been eating is often a trap - it's not what you think it is - Earth.com

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Edit 2024–10.

At least they know the answer if they wanted it.

Why do narcissists want to hurt your feelings, even after they discard you?

He then describes the function of a fuse.

These are simplified answers to the original question, and does not change anything I wrote above.

This device then solves the entire problem.

2025 NCAA Men's Outdoor Preview: A Classic 1500, Loaded Steeple, & Can 3 UNM Guys Win the Team Title? - LetsRun.com

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

First Sentence:

Astronomers are stunned after the quiet development of the largest telescope ever built in China. - Farmingdale Observer

What is lightning?

2024–10–14 [Omar Gharbi Omar Gharbi ]

but this device (an Inductor) … impedes the rapid changes in the current.

Nephrologist shares signs to know if your kidneys are not healthy: 'Weight loss and poor appetite to swelling in…' - Hindustan Times

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

‘Most Unloved Bonds’ Turn Routine US Auction Into Crucial Test - Bloomberg.com

the problem then depends on "how fast does the fuse operate?".

(Dc diagram shown, AC is similar).

eight

Is it true that schizophrenia can sometimes be a demonic attack or black magic?

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

The third is lightning and “how it gets conducted into a home.”

What misfortune led to an important discovery?

But it can get overloaded, and no longer works.

But… the neutral is now “floating” because of the 1 ohm resistance.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Are rich people harder workers than poor people as a whole?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

At one ohm, the resistor has a maximum of 1 watt power.

There are two important concepts here.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

but I think this circuit , shows a few more pieces.

So, the voltage could go up to 500 volts, and the fuse will not open up.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

It also is a device that limits the change in current flow.

[old diagram got deleted by accident]

2024–10–10[John johnson John Johnson ]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

An AC voltage/ current source, and an ac inductive load.

This is where the MOV conducts again, and dissipated the energy.

For this case there are devices called Metal oxide varistors (MOV).

[image of Common-mode choke]

What does a fuse do?

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

a photo is worth a thousand words.

nine

The other is “what does a “fuse” do?”

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

This is 'the assistant's answer'

what exactly is a ‘surge’ protector?

This is where this question deviates from being a 'generic' question, and becomes more specific.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

It seems Mohan does not understand the difference between a comment and an Answer.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Because the load is inductive, the current lags the voltage.(by a bit).

One is “what exactly is in a ‘surge protector’ ? ”

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

A circuit breaker is similar, but is resettable.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

One

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Now when you have a certain ac resistance, then a current flows in a loop.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

so, what happens?

In schematic diagrams this is the symbol for a fuse:

These devices are installed between the “hot” and “neutral” and protective ground.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

This one hit behind the barn.

He then asserts :

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

The bolt then partially travels down the line to your home.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

There are three different concepts here that are getting confused.

Here is a simplified AC power diagram.

I post the exact comment here.

Barnstars:

He then describes Rainy Season and Lightning.